How To Replace a Toilet

2/17/2020 (Permalink)

Replacing a toilet in a Liberty, TX home

How To Replace a Toilet

A high-quality toilet can last over 40 years with minimal care. In fact, most homeowners in Liberty, TX replace an old toilet for cosmetic purposes or to get rid of a water guzzler. Whatever the reason, replacing a lavatory is a straightforward project that requires only a tiny fraction of your weekend.
Supplies you will need for the job:

• Adjustable wrench
  
• Putty knife
  
• Sponge
  
• Wax ring
  
• Plumber’s putty
  
  

Draining the Water

The first step to any toilet repair project is shutting off the water at the valve. The last thing you want is a disassembled, leaking toilet in the middle of your little operation. Flush to get rid of any stored water in the tank, then use a sponge to suck the rest of it. Next, get rid of the little puddle that collects in the bowl, and you should be ready to get started.

Removing the Toilet

Loosen for the bolts that hold the toilet on the floor. Sometimes, they are hidden under porcelain or plastic caps, but anyone who has ever fixed a leaking toilet should not have a problem finding them. If the nuts are rusty, use a hacksaw to cut off the bolts below the nuts. Then get someone to help you lift the fixture off the flange and take it far away from the work area.

Installing a New Toilet

First, clean the flange thoroughly and test-fit the new facility to make sure it works with the current setup. If everything sits nice and level, remove it and fix the wax ring on the bowl’s discharge outlet. Place it on the flange, guided by the bolts, then screw the nuts carefully to avoid cracking. Replacing a toilet might seem like a life-size task for the uninitiated, but it’s not. The only risk you run is ending up with a leaking toilet, which is also an easy and inexpensive fix.